Download Resetter Epson L310– Hello everyone,  I will share about how to reset the Epson L310 printer using the Epson L310 resetter or Adjustment Program software.

For those who don’t know, resetting the Epson printer is a way to reset the memory in the printer components that have reached the specified limit

The time when the Epson printer needs to be reset varies, depending on the intensity of using the printer, such as for printing or for photocopying.

Epson printer can’t be used

Epson printers cannot be used because there are several things that can cause it, such as paper jams, paper jams, mechanical damage, electronic damage, or because they need to be reset

Of course, each brand will be different for how to reset it. For example, for Epson, using the Adjustment Program/Adjprog.exe or Canon application, often using Service Tool v3400 etc.

Usually the characteristics are almost the same, marked by the indicator light flashing or blinking, the cause of which is due to full ink disposal, service required, etc.

In addition, here are the characteristics of printer errors that need to be handled to reset:

  • When turning on the printer, the printer does not move at all, and the indicator light flashes
  • An error message appears “Service Required”
  • An error message appears “A printer’s ink pad is nearing the ends of its service life

If the printer has an error but there are no features mentioned above, then it might not be an error because it has to be reset

Also read : How to Reset the Epson L1110 Printer and How to Reset the Epson L3110 Printer

How to reset the printer using the Epson L310 Resetter

If indeed your printer has shown the characteristics that I mentioned above, don’t worry and don’t immediately take it to a service center, try to reset yourself at home using a resetter

Well, for the resetter program that is used to reset the Epson L310 printer, it is indeed a little different, compared to the Epson L310 resetter.

This Epson L310 resetter is the same as the Epson L310 resetter which must be activated before it can be used

Here’s step by step, how to reset the Epson L310 using the resetter that I shared:

  • Open the Adjprog.exe application, then select Particular adjustment mode
  • Then select the waste ink pad counter then OK, as shown below
  • Next, check the Main pad counter and then click the check button, if how many points appear, then click the Initialize button and then OK
  • If so, then you are asked to turn off the printer, then turn off the printer by pressing the power button
  • If it has been turned off, then now you turn on the printer again, by pressing the printer power button
  • Up to this step we have succeeded in resetting the Epson L310, to make sure, try pressing the Check button again, and make sure the main pad counter point is 0

Epson L310 Resetter Problems

Sometimes there is a communication error, if the notification appears then make sure you use a resetter for the same printer, or you can also replace the usb cable used to reset


From all the explanations above, you have succeeded in resetting the Epson L310 using the Epson L310 resetter.

Not only that, you can also activate the Epson L310 to be able to use it

Take advantage of this knowledge wisely, for the Epson L310 resetter application, you can download it via the link below

So many tutorials on how to reset the L310 printer and also how to activate the L310 resetter, hopefully it can be useful. If, there are still problems, please ask in the comments column or first see the FAQ below. Thank you

Leave a Reply

Back to top button